Work with Certinia Data in FoxPro



Load Certinia data into a FoxPro database. This article includes full code and a walk-through of the process.

The CData ODBC driver for Certinia enables you to access Certinia data using the ODBC standard. You can use the CData ODBC Driver for Certinia to integrate Certinia data into your FoxPro project. The procedure below provides a walk-through of the included code sample, which saves Certinia data into tables in a FoxPro database.

Connect to Certinia as an ODBC Data Source

If you have not already, first specify connection properties in an ODBC DSN (data source name). This is the last step of the driver installation. You can use the Microsoft ODBC Data Source Administrator to create and configure ODBC DSNs.

NOTE: Set the 'Map To WVarchar' connection property to FALSE (FoxPro uses the ODBC W API and returns the WCHAR for the value type).

There are several authentication methods available for connecting to Certinia: login credentials, SSO, and OAuth.

Authenticating with a Login and Token

Set the User and Password to your login credentials. Additionally, set the SecurityToken. By default, the SecurityToken is required, but you can make it optional by allowing a range of trusted IP addresses.

To disable the security token:

  1. Log in to Certinia and enter "Network Access" in the Quick Find box in the setup section.
  2. Add your IP address to the list of trusted IP addresses.

To obtain the security token:

  1. Open the personal information page on certinia.com.
  2. Click the link to reset your security token. The token will be emailed to you.
  3. Specify the security token in the SecurityToken connection property or append it to the Password.

Authenticating with OAuth

If you do not have access to the user name and password or do not want to require them, use the OAuth user consent flow. See the OAuth section in the Help for an authentication guide.

Connecting to Certinia Sandbox Accounts

Set UseSandbox to true (false by default) to use a Certinia sandbox account. Ensure that you specify a sandbox user name in User.

Connect and Transfer

To get started, add the code sample to a new project. You can execute the following command to save all tables without displaying them:

DO C:\Temp\sqldump.prg WITH "CData Certinia Source", "TESTDB", .f.

Below is the process that the program follows:

  1. Create a new FoxPro database.
  2. Open a connection to Certinia data with the line below:

    m.hSQLconnection = SQLCONNECT(m.cODBCDSN)
  3. If the connection was successful, you can now retrieve the list of tables using the SQLTABLES function. The code below saves the list of tables in sys_tables.dbf:

    WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR m.nSQLTABLES = SQLTABLES(m.hSQLconnection) IF lUseDistinctConnections WAIT WINDOW "Closing ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR SQLDISCONNECT(m.hSQLconnection) m.hSQLconnection = 0 * SQLCONNECT needs to be called again ENDIF IF m.nSQLTABLES > 0 * create local table containing list of tables in db COPY TO (m.cImportData + "sys_tables") USE * convert each table to DBF USE (m.cImportData + "sys_tables") ALTER TABLE DBF("sys_tables") ; ADD COLUMN records i ; ADD COLUMN dbfname m
  4. Scan over each table, saving it to a DBF file. The function ODBCtoDBF stores the table in a DBF file and then opens a grid if the lBrowse parameter is set to true: FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer) WAIT WINDOW ; "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ; NOWAIT NOCLEAR ACTIVATE SCREEN * strip characters incompatible with FoxPro out of the name of the DBF file m.cTableAlias = "" m.nTableNameLen = LEN(m.cTableName) m.nTableNameStart = 1 FOR m.nTableNameStart = 1 TO m.nTableNameLen m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1) IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter)) m.cTableAlias = m.cTableAlias + "_" ELSE m.cTableAlias = m.cTableAlias + m.cCharacter ENDIF ENDFOR m.cFromTable = m.cTableName m.cTempViewAlias = m.cTableType + "_" + m.cTableAlias LOCAL loException as Exception LOCAL lnResultSets TRY * run query m.lnResultSets = SQLEXEC(m.lhSQLConnection, ; "SELECT * FROM " + m.cFromTable, ; m.cTempViewAlias, ; aSQLResult) IF m.lnResultSets#1 SET STEP ON ENDIF ACTIVATE SCREEN CATCH TO m.loException ACTIVATE SCREEN ? "Error opening " + m.cTempViewAlias + ":" ? m.loException.Message ? m.loException.Details ENDTRY IF !USED(m.cTempViewAlias) RETURN ENDIF * copy records from view cursor to disk SELECT * FROM (m.cTempViewAlias) ; INTO TABLE (m.cImportData + m.cTableAlias) IF USED(m.cTableAlias) ACTIVATE SCREEN FLUSH && flush the buffer to write the data to disk IF m.lBrowse * pop the table up on screen SELECT (m.cTableAlias) BROWSE NORMAL NOMODIFY NOWAIT ACTIVATE SCREEN ELSE * close on-disk table for now USE IN (m.cTableAlias) ACTIVATE SCREEN ENDIF ENDIF IF USED(m.cTempViewAlias) USE IN &cTempViewAlias && close SQL view ACTIVATE SCREEN ENDIF WAIT CLEAR ENDFUNC
  5. You can now save tables of Certinia data as DBF files.

Below is the full code, in FoxPro 9 syntax:

PARAMETERS cODBCDSN, cDatabaseName, lBrowseAfterConvert * cODBCDSN The ODBC data source name, used for the name of the folder where the DBF tables are stored. * cDatabaseName The name of the FoxPro database to use. This database is created if it does not exist. The default is DATABASE_NAME. * * lBrowseAfterConvert If ".t." display each table with the BROWSE command after importing it. If ".f." close each table before moving on to the next one. #define ODBC_DATASOURCE "DataSourceName" #define DATABASE_NAME "odbcdata" m.m_tpath = ".\" && root directory for data ON ERROR SET SAFETY OFF IF VARTYPE(m.cODBCDSN)#"C" .or. EMPTY(m.cODBCDSN) m.cODBCDSN = ODBC_DATASOURCE ENDIF IF VARTYPE(m.cDatabaseName)#"C" .or. EMPTY(m.cDatabaseName) m.cDatabaseName = DATABASE_NAME ENDIF m.cImportData = m.cODBCDSN + "\" CLOSE TABLES ALL CLOSE DATABASES ALL IF !DIRECTORY(m.cImportData) MKDIR (m.cImportData) ENDIF CREATE DATABASE (m.cDatabaseName) CREATE CONNECTION (m.cDatabaseName) DATASOURCE (m.cODBCDSN) DATABASE (m.cDatabaseName) WAIT WINDOW "Opening ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR m.hSQLconnection = SQLCONNECT(m.cODBCDSN) IF m.hSQLconnection > 0 * Connection successful; get list of tables WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR m.nSQLTABLES = SQLTABLES(m.hSQLconnection) IF m.nSQLTABLES > 0 * Create local table containing list of tables in db COPY TO (m.cImportData + "sys_tables") USE * Convert each table to DBF USE (m.cImportData + "sys_tables") ALTER TABLE DBF("sys_tables") ; ADD COLUMN records i ; ADD COLUMN dbfname m SCAN m.cCurrentTable = TRIM(sys_tables.table_name) m.cCurrentTableType = TRIM(sys_tables.table_type) && Valid values are "SYSTEMTABLE", "TABLE", and "VIEW". IF m.cCurrentTableType = "TABLE" or m.cCurrentTableType = "VIEW" ODBCtoDBF(m.cCurrentTable, m.cCurrentTableType, m.lBrowseAfterConvert, m.hSQLConnection) ELSE ACTIVATE SCREEN ? "ERROR:", m.cCurrentTable, "Couldn't open ODBC connection." =MESSAGEBOX("couldn't open data source " + m.cODBCDSN + " for table " + m.cCurrentTable + ".") ENDIF ENDSCAN BROWSE NORMAL NOWAIT ELSE =MESSAGEBOX("No tables found in data source " + m.cODBCDSN + ".") SET STEP ON ENDIF SQLDISCONNECT(m.hSQLconnection) ELSE =MESSAGEBOX("Could not open data source " + m.cODBCDSN + ".") SET STEP ON ENDIF FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer) WAIT WINDOW ; "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ; NOWAIT NOCLEAR ACTIVATE SCREEN * Strip characters incompatible with FoxPro out of the name of the DBF file m.cTableAlias = "" m.nTableNameLen = LEN(m.cTableName) m.nTableNameStart = 1 FOR m.nTableNameStart = 1 TO m.nTableNameLen m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1) IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter)) m.cTableAlias = m.cTableAlias + "_" ELSE m.cTableAlias = m.cTableAlias + m.cCharacter ENDIF ENDFOR m.cFromTable = m.cTableName m.cTempViewAlias = m.cTableType + "_" + m.cTableAlias LOCAL loException as Exception LOCAL lnResultSets TRY * Run query m.lnResultSets = SQLEXEC(m.lhSQLConnection, ; "SELECT * FROM " + m.cFromTable, ; m.cTempViewAlias, ; aSQLResult) IF m.lnResultSets#1 SET STEP ON ENDIF ACTIVATE SCREEN CATCH TO m.loException ACTIVATE SCREEN ? "Error opening " + m.cTempViewAlias + ":" ? m.loException.Message ? m.loException.Details ENDTRY IF !USED(m.cTempViewAlias) RETURN ENDIF * Copy records from view cursor to disk SELECT * FROM (m.cTempViewAlias) ; INTO TABLE (m.cImportData + m.cTableAlias) IF USED(m.cTableAlias) ACTIVATE SCREEN FLUSH && Flush the buffer to write the data to disk IF m.lBrowse * Display the table on screen SELECT (m.cTableAlias) BROWSE NORMAL NOMODIFY NOWAIT ACTIVATE SCREEN ELSE * Close on-disk table USE IN (m.cTableAlias) ACTIVATE SCREEN ENDIF ENDIF IF USED(m.cTempViewAlias) USE IN &cTempViewAlias && Close SQL view ACTIVATE SCREEN ENDIF WAIT CLEAR ENDFUNC

Ready to get started?

Download a free trial of the Certinia ODBC Driver to get started:

 Download Now

Learn more:

Certinia Icon Certinia ODBC Driver

The Certinia ODBC Driver is a powerful tool that allows you to connect with live data from Certinia, directly from any applications that support ODBC connectivity.

Access Certinia data like you would a database - read, write, and update Certinia Invoices, Expenses, Accounts, etc. through a standard ODBC Driver interface.